Setting up for performance – Balance Lug – Goat Island Skiff

John Goodman who recently spent 5 days semi racing a Goat Island Skiff in the Texas200 event got back to me with some observations and even some pictures of aspects of the boat and the sailing.

I have responded with suggestions to make some further improvements. Between John and me there are some useful tips about setting up a boat for more speed.

However the standard setup of the Goat is fine for most – it is still pretty quick in standard form.

There is advice for both lug and sprit traditional rigs here.

PJ and Cliff show how to build a plywood Quick Canoe in one week

Cliff and PJ live in Warm Queensland and Wintry Tasmania. However they both like to go the the yearly (June) wooden boat festival in tropical Far North Queensland.

This year they decided to build one of my Quick Canoes. They started on Saturday and finished including putting the canoe on the car roof by the following thursday.

They are experienced woodworkers so added some very nice details.

Minimal repairs to keep an old Mirror plywood sailing dinghy going

Melanie in the UK wrote to me. She has just bought an old Mirror dinghy and started sailing for the first time.

Problem is that the boat leaks and she doesn’t want to stop using the boat until the end of the season.

I have a philosophy of keeping older boats on the water and not pulling them off for months on end until you have the time to do the job.

So the article here is useful to see what can be done with an old leaky plywood sailing dinghy to keep it going.

It is perfect sailing weather at the moment in the UK and it is better she is out there learning but with the worst of the leaks gone.

With a disciplined approach she should be able to get all of this done in a week or so. The general leaks fixed permanently and the rotted area reinforced so that the boat won’t break.

Light outriggers to add to your canoe for stability. Fast sailing, Fishing or Diving Philippines: storerboatplans.com

Drop in Outriggers – photo and comments from the Philippines

Finally after many years of selling the plan I have a photo of a boat with the outriggers from the drop-in outrigger plan.

Every part of the outrigger is very light. The first one we built had each component under 10lbs.

It can make a canoe or kayak into a killer sailing boat. Or can convert a canoe, kayak or suitable dinghy into a stable fishing or diving platform for paddle or outboard.

First Goat Island Skiff Kit sold in the USA

Clinton Chase in Portland Maine has just delivered a precut kit for the Goat Island Skiff to John in Texas who is building the boat.

The kit arrived in a big box.

This little article tells how his kids are involved in the boatbuilding starting with attaching the framing to the accurately cut plywood. He knows the rule that it is more important what the kids learn and experience than it is to minimise the use of wood!

Storer Boats FORUM

This is a list of the latest posts on the Storerboats Forum.

It has information about building, discussions about design, photos of buildings and launchings and much more.

A main interest is tweaking the best possible performance out of traditional looking boats.