1 2 3 4 5

Woodwork

Precut Plywood Kits Available for Storer Boats – UK, Europe, USA, Australia, South Africa.

List of Kit suppliers for Storer Boat Plans. UK and Europe, USA, Australia, South Africa. Kits make building a Storer Boat even easier.

A week fast building two Quick Canoes for touring the Loire in France – Part 1

The above photo was taken on the third day of our Canoeing trip on the Loire River in France. The two black canoes didn’t even exist a week ago.

When I wrote the original article on Disposable Canoeing I had no idea at all what it would lead to me and a bunch of adventurers, wine and cheese connoisseurs. Most of us didn’t even know each other! The picture above is the result of this adventurism, but what happened to make it happen?

What technology was involved to make the boats faster to build than most stitch and glue boats and what weather conditions did we have to overcome to make it all happen.

The Canon – Tools for thinking about sailing and boat design – Books and Articles

One of the most important things as a designer or sailor is to keep an open mind, but also to be able to analyze things in light of real experience and prior knowledge. These are online and paper resources that force thinking in different ways.

This article, after a bit of a spiel, goes on to give some great resources that “opened my eyes” at different times in my life.

They focus on areas of structural design, sailing, sail aerodynamics and touch on a bit more.

Minimal repairs to keep an old Mirror plywood sailing dinghy going

Melanie in the UK wrote to me. She has just bought an old Mirror dinghy and started sailing for the first time.

Problem is that the boat leaks and she doesn’t want to stop using the boat until the end of the season.

I have a philosophy of keeping older boats on the water and not pulling them off for months on end until you have the time to do the job.

So the article here is useful to see what can be done with an old leaky plywood sailing dinghy to keep it going.

It is perfect sailing weather at the moment in the UK and it is better she is out there learning but with the worst of the leaks gone.

With a disciplined approach she should be able to get all of this done in a week or so. The general leaks fixed permanently and the rotted area reinforced so that the boat won’t break.

Quick Canoe assembly – Woodworker builds in 4.5 hours (I took 2 weekends)

Fast building was part of the aim of this plan! Also to keep the expense down. Rick surprised me – I was thinking it would take a couple of weekends. The Quick canoe is very simple to build and comes out of three plywood sheets. A very simple plywood canoe It has been designed to be as easy to build as possible while keeping some of the qualities of a good paddling canoe – in particular the ability to track.

Launching after the build – Handy Punt – Stable for Fishing

Fiona Harbison and friends have just launched their new Handy Punt for fishing and family outings.

Fiona is the sister of Helen (hope I have that right) who built a Nutshell pram in a number of the Duck Flat spring or autumn boatbuilding schools.

It is called Farnark, which will strike a chord with Australians and New Zealanders through the work of John Clarke. There is a picture of the boat and a clip of John Clarke reprising his farnarkling spiel.

“Disposable” Canoeing – building a canoe in a few hours.

I don’t have a car so how can I go canoe touring? Its something I fell in love with in the USA on Lake Powell.

This is an idea for a simple, cheap, almost throwaway (or give away) canoe. I can get the materials shipped to somewhere on a river, build the boat over a couple of days then go for a paddle.

At the end I can give the boat away or store it for the next part of the trip.

Podcast Online – Wooden Boat Construction by Michael Storer – 2 of 3

This is the second of my talks in the USA. It focuses a bit more on construction and some of the methods that can be used to keep a boat light and simple, but very strong and stiff.

It also discusses how there is a “creep” in boatbuilding and design that increases the weight of boats way over what is really needed for a strong structure.

Podcast Online – Wooden Boat Design by Michael Storer – 1 of 3

This talk is the first hour of my exposition on boat building and design. There are two more parts to come. This covers some of the background and design issues. The second is more on the building side and the last is a bit more about why the Australian (and New Zealand) wooden boat tradition is different from the Northern Hemisphere.

You can stream the talks over your internet connection or download them as a podcast.