Table of Contents for Michael Storer Wooden Boats Forum.
We have moved much of our activity to the Facebook Groups. See the links in the Menu above. But there are so many great questions asked and discussed on the Oz Woodwork Forums..
We have moved much of our activity to the Facebook Groups. See the links in the Menu above. But there are so many great questions asked and discussed on the Oz Woodwork Forums..
Australia now has brilliant kits for the Goat Island Skiff from O’Connor Boatworks.
A new local (Adelaide) OzRacer has been on its way for a few months now – and has made a beautiful box. People pay money for a beautiful box!
I received an email from Norm who is building a Beth Sailing canoe at a boatyard while living in a camping trailer.
I have drawn up a solid mast that will have the same bending characteristics as the OZracer Mk2 so will suit the sailshape that comes with the plans
Peter Hyndman has been building his Eureka Canoe forever. I think it is still not finished – however he did document it beautifully
Peter Hyndman has been boiling down the essence of the Eureka Canoe he has been building and created a great new website that runs through all the processes of building
The basic problem is that end grain is highly absorbent so it can steal the resin from the join leaving insufficient for good bonding.
Just a simple wooden box with a lightbulb inside and a switch on the outside. The swing down lid has slots so the tops of the epoxy pumps are outside the box or a hinged lid you just flip up when you need to pump.
Epoxy that has not cured is a problem most of use come up against at least once. However it is unlikely to happen a second time as it’s operator error in 99.9% of cases. So what are the typical mistakes?
Teak and other timbers make great veneer decks. There are a couple of tricks with the sealant between the planks though
Battery Drills (most convenient) with a clutch and variable speed remove the need for dozens of clamps which can be a major cost.
There are a number of labour and materials saving techniques that reduce labour and reduce the quantity and cost of epoxy used – wet on wet coating, one hit gluing
If ply sheets are precoated before assmbling the boat it saves lots of time. Here are some guidelines
This is a basic section on the stages of fibreglassing areas on a plywood boat, canoe or SUP. Many problems can be avoided by being methodical and setting up each stage carefully rather than rushing in.