FAQ – Materials for strip planked boat or canoe in Australia – for lightness and beauty.
Ultralight strip planked boats using Paulownia, Balsa and Western Red Cedar. Superlight Eureka Canoe and Goat Island Skiff and the amazing 12lb balsa canoe
Lightweight
Plywood boat building – scarfs or buttstraps
I specify butt straps because they are simpler, faster and have a neat result for amateurs every time. But I do place them in the hull where they won’t affect curvature of the ply. What are their advantages for joining ply compared scarf joints.
S-12 Club, new dinghy design launched (very light wind)
The new dinghy design is now called the S-12.
Launched into light winds, there’s not a lot to report, but a photo essay. And some comments about the staying of the rig and keeping boats cheap and simple.
S12 Club New design – lightweight and efficient plywood racing dinghy
A new lightweight 12ft plywood dinghy under development. This prototype by Canadian Rick Landreville. It won’t have a cloud of sail area,but will be light enough low drag enough to hit consistently high speeds relative to other boats of this length.
The Myths of Modern Sailing Boat Performance. Started with Mizzen and speed question
OK … it IS a rant. But it was prompted by the very legitimate question about why have a mizzen sail.
But sadly I descend into a rant about how expense is a really poor predictor of performance.
OzRacerRV plan available – more simplification for 8ft sailing dinghy
The new OzRacer RV is a much simpler build of the original OzRacer concept. It also is a direct relative of the slightly larger and much faster OZ Goose
Peter Caspari and his Electric Quick Canoe – square backed canoe.
The Quick Canoe Electric is a simple to build cartoppable square back canoe.
It can be quickly and simply built in plywood.
Peter Caspari’s boat is shown here.
The standard Storer boat plans “kick back” dagger rudder.
The rudderbox design I use has distinct advantages over normal swinging rudder setups. Once you try this design you will never be satisfied with a swinging blade again. But some of the details are important!
Book – “A lighter ton” – New Zealand racing yacht design in the 1970s
In the late 70s as a sailing teenager I drew boats on every available paper surface.
A new book “a lighter ton” describes the exciting development of racing yachts to create newer, lighter, faster and cheaper and FUNNER boats.
Many of the developments were from New Zealand designers such as Bruce Farr, Paul Whiting and Laurie Davidson. A new book by Richard Blakey covers this exciting experimental period in yacht design
A week fast building two Quick Canoes for touring the Loire in France – Part 1
The above photo was taken on the third day of our Canoeing trip on the Loire River in France. The two black canoes didn’t even exist a week ago.
When I wrote the original article on Disposable Canoeing I had no idea at all what it would lead to me and a bunch of adventurers, wine and cheese connoisseurs. Most of us didn’t even know each other! The picture above is the result of this adventurism, but what happened to make it happen?
What technology was involved to make the boats faster to build than most stitch and glue boats and what weather conditions did we have to overcome to make it all happen.
The Canon – Tools for thinking about sailing and boat design – Books and Articles
One of the most important things as a designer or sailor is to keep an open mind, but also to be able to analyze things in light of real experience and prior knowledge. These are online and paper resources that force thinking in different ways.
This article, after a bit of a spiel, goes on to give some great resources that “opened my eyes” at different times in my life.
They focus on areas of structural design, sailing, sail aerodynamics and touch on a bit more.
First detailed sailing report for OZ Goose – a simple and cheap 12ft sailboat.
First detailed sailing report of the Goose 12ft sailboat.
The Oz Goose is a 12ft sailboat derived from the smaller OzRacer/PDRacer/Brick line. It uses all the same running gear as the OzRacer.
Video of Quick Canoe in Hungary.
A video of the Quick Canoe in action.
My Agent in Hungary who sells plans in both English and Hungarian has launched the first Quick Canoe in those parts. It is designed as a very simple and easy to build boat. It is not a perfect high performance boat, but the numbers have been worked out to give good performance despite the simple shape. It won’t be as good as the best fibreglass canoe, but it will be better than many average ones. And much cheaper and lighter.
“All boat design is a compromise” – Rubbish
Reprint of an article I wrote a few years ago for Watercraft magazine in the UK.
The article points out why I think most of the discussion about boat design being a “compromise” is rubbish and taking that point of view means that the design is sure to be compromised.
What happens if we don’t accept the compromise?
Setting up for performance – Balance Lug – Goat Island Skiff
John Goodman who recently spent 5 days semi racing a Goat Island Skiff in the Texas200 event got back to me with some observations and even some pictures of aspects of the boat and the sailing.
I have responded with suggestions to make some further improvements. Between John and me there are some useful tips about setting up a boat for more speed.
However the standard setup of the Goat is fine for most – it is still pretty quick in standard form.
There is advice for both lug and sprit traditional rigs here.
Two plywood canoes designs – How to choose a plan.
This page compares the two plywood canoes in my range. Both have detailed plans and are simple to build.
The page is to explain the differences and to help potential builders see if one of the boats suits their needs.
Lots of links to pictures, build articles and even videos.
The cla
PJ and Cliff show how to build a plywood Quick Canoe in one week
Cliff and PJ live in Warm Queensland and Wintry Tasmania. However they both like to go the the yearly (June) wooden boat festival in tropical Far North Queensland.
This year they decided to build one of my Quick Canoes. They started on Saturday and finished including putting the canoe on the car roof by the following thursday.
They are experienced woodworkers so added some very nice details.
Perttu in Finland takes his cheap plywood Quick Canoe on a river trip – Videos
Perttu took his recently built “Quick Canoe” on a trip down a river in Finland.
We don’t have rivers like this in Australia! To see them is quite exciting.
The Quick Canoe is designed to be very cheap and easy to build, but still work OK.
Drop in Outriggers – photo and comments from the Philippines
Finally after many years of selling the plan I have a photo of a boat with the outriggers from the drop-in outrigger plan.
Every part of the outrigger is very light. The first one we built had each component under 10lbs.
It can make a canoe or kayak into a killer sailing boat. Or can convert a canoe, kayak or suitable dinghy into a stable fishing or diving platform for paddle or outboard.
Perttu Builds a Plywood Quick Canoe in Finnish Snow
Perttu is building his Quick Canoe in almost impossible conditions.
The middle of the Finnish Winter.
But the boat is going together well. He is building it very cheaply out of ply and polyester resin.